Stump grinder with remote control. Our stump grinder LASKI F500HR is designed for cutting both above and under-ground stump parts. Max. stump diameter to be cut is unlimited. It's remote controller facilitates makes manual labour much easier. Overall width of 890 mm makes limited spaces and narrow sites more accessible. The cutting process is performed
Laski F460EI Stump Grinder
– Posted in: Laski Stump CuttersNew handy stump grinder with electric travel gear. Our stump grinder LASKI F460 is based on our field-proven model LASKI F450. This machine is designed for cutting both above and under-ground stump parts by cutting in a swinging way. Max. stump diameter to be cut is in fact unlimited (recommended up to 800 mm). Due
Laski F460/18 Stump Grinder
– Posted in: Laski Stump CuttersNew handy stump grinder Our stump grinder LASKI F460 is based on our field-proven model LASKI F450. This machine is designed for cutting both above and under-ground stump parts by cutting in a swinging way. Max. stump diameter to be cut is in fact unlimited (recommended up to 800 mm). Due to its swivel base
Laski LS160PPB Wood Chipper
– Posted in: Laski WoodchipperPowerful chipper with petrol engine on braked chassis (38 HP). The chipper LS 160 PPB is a compact machine intended for disposal of wood waste, twigs, bark, branch-wood and other above-ground biomass, for chipping of redundant timber such as sticks, deals, pickets etc. and also for manufacture of chips from aforesaid materials. It can dispose
Laski LS200T Wood Chipper (750 – 1000 rpm)
– Posted in: Laski WoodchipperTractor-mounted chipper with swivel base and hitch for 8t trailers. The chipper LS 200 T is a compact machine intended for disposal of wood waste with diameters up to 200 mm. It should be coupled to a tractor with corresponding three-point linkage (cat. 2). For machine drive you need also PTO shaft assembly from 750
Laski LS160TT Wood Chipper
– Posted in: Laski WoodchipperPowerful chipper (1000rpm) with swivel base and hitch for 8t trailers. The chipper LS 160 TT is a compact machine intended for disposal of wood waste with diameters up to 160 mm. It should be coupled to a tractor with corresponding three-point linkage (cat. 2). For machine drive you need also PTO shaft assembly for
Laski LS100/27CB Wood Chipper
– Posted in: Laski WoodchipperChipper with petrol engine on braked chassis The chipper LS 100/27 C is designed for disposal of wood waste, twigs, bark, branch-wood and other above-ground biomass. It can dispose all these materials with diameters up to 100 mm. The chipper is also equipped with a loading roll hydraulically controlled and linked to an automatic system
Lumag MD 500H PRO/HT Mini Dumper
– Posted in: Mini Dumpers Track DumpersThe Lumag MD500H PRO HT mini dumper The small tracked dumper is designed for ease of use, for example, to transport loads over rough terrain or to clear snow. The container is easily emptied simply by tilting. Only 70 cm wide allows you to drive on narrow roads and pass through most doors or gates.
Lumag MD 800H PRO Mini Dumper
– Posted in: Mini Dumpers Track DumpersPrice €4,813.01 excl. 23 % vat €5,920.00 incl. vat The Lumag MD800H PRO mini dumper The small tracked dumper is designed for ease of use, for example, to transport loads over rough terrain or to clear snow. Universal body with tilting sides. Only 71 cm wide allows you to drive on narrow roads and pass
Lumag MD500H PRO/S Mini Dumper
– Posted in: Mini Dumpers Track DumpersThe Lumag MD500H PRO/S mini dumper The small tracked dumper is designed for ease of use, for example, to transport loads over rough terrain or to clear snow. The container is easily emptied simply by tilting. Only 70 cm wide allows you to drive on narrow roads and pass through most doors or gates. Self-loading
Lumag MD 500H PRO/HTS Mini Dumper
– Posted in: Mini Dumpers Track DumpersThe Lumag MD500H PRO-HTS mini dumper The small tracked dumper is designed for ease of use, for example, to transport loads over rough terrain or to clear snow. The container is easily emptied simply by tilting. Only 70 cm wide allows you to drive on narrow roads and pass through most doors or gates. Hydraulic
Lumag Rambo HC15PRO Wood Chipper
– Posted in: Landscaping Wood ChippersDelivery €120.00 excl. vat Technical data: Engine: 4-stroke petrol 1-cylinder, OHV Engine power: 9 kW /13hp at 3600 rpm. Engine capacity: 420 cm 3 Amount of oil: 1.2 L Starter: electric start and reverse starting Fuel: unleaded gasoline Fuel tank capacity: 6.5 L Cutting roller speed: 2000 rpm Noise level: 120 dB (A) Dimensions (LxWxH): 1900x800x1500
Lumag Rambo HC10PRO Petrol Wood Chipper. New Model.
– Posted in: Landscaping Wood ChippersPrice €1,471.54 excl. 23% vat. €1,810.00 incl. vat Sale 11/12. 2024 Price €1,190.24 excl. 23% vat. €1,464.00 incl. vat
Branch logger Urban HM 70
– Posted in: Urban Branch Loggers -The branch loggers URBAN produces large chips (logs) from branches and waste wood –blocks. Unlike fine chips, large chips (logs) are suitable for heating in conventional solid fuel boilers and wood gasifying boiler. You convert waste wood and branches into full fuel thanks to chipping. The branch loggers URBAN are working on the principle of
Urban Video
– Posted in: UncategorizedBelt conveyors and complete Chipping devices
– Posted in: Urban Branch Loggers -The belt conveyor is driven by a V-belt or hydraulic motor. The advantage of the food motor function is the possibility of regulation of the rotation speed and therefore varying the falling distance of the wood logs on the trailer. Belt conveyors are available in 1.7/2.1/2.6 m lengths. The angle of the belt conveyor is
Urban bagging systems, bags and spare parts
– Posted in: Urban Branch Loggers -Raschle bags The recommended dimensions of raschle bag is 57 x 104 cm. The mass of one bag with logs in is from 15 to 30 kg. The volume of one bag is 0.08 m². The bags are easy to handle. Storage area is minimise by stacking bags. There is faster drying due to improved
Urban SMH 70
– Posted in: Urban Branch Loggers -The Urban SMH 70 is the road tow version of the SM 70. It is powered by a 10 hp Briggs and Stratton engine and comes with a double bagger as standard. It produces logs of 60 to 130 mm in length and can cut softwood of thicknesses up to 75 mm and hardwood of
Urban SMV 70
– Posted in: Urban Branch Loggers -The Urban SMV 70 branch logger is powered by a 10 hp Briggs and Stratton 4-stroke, single cylinder, petrol engine. It produces logs of between 60 and 130 mm in thickness. Logs fall into bags which measure 60 x 85 cm in size. The machine is supplied with 50 bags and additional bags are available.
Urban SM 70
– Posted in: Urban Branch Loggers -The Urban SM 70 branch logger is powered by a 10 hp Briggs and Stratton 4-stroke, single cylinder, petrol engine. The SM 70 logger is available with a single bagger or double bagger units. It produces logs of between 60 and 130 mm long and the machine will cut softwood of up to 75mm in